Drainer Grooves

Drainer Grooves Application

Drainer grooves are a feature cut into a solid countertop to help water drain off the countertop into the sink. Several grooves are milled into the countertop surface, serving as a permanent draining board.

• Approved for 20 and 30 mm Caesarstone quartz, Caesarstone Mineral^TM  and Caesarstone ICON^TM surfaces (not 13 mm) with the guidelines below
• Not tested or approved for Caesarstone Porcelain.

Guidelines

Fabrication

• Maximum groove depth 4 mm
• Maximum groove width 5 mm
• Minimum distance between grooves 6 mm
• Do not create draining grooves on joins between slabs

Care & Maintenance

• The draining grooves may be more sensitive to staining than the rest of the surface; it is therefore important not to allow dirt and residue to dry out in the grooves.
• Clean according to the Caesarstone Care & Maintenance guidelines.

Caesarstone provides warranty for applications fabricated from Caesarstone surfaces, and for Caesarstone surfaces in which products are installed, provided that those appliances and applications are approved for use by Caesarstone, and installed in accordance with the manufacturer’s instructions, Caesarstone fabrication and installation guidelines, and any additional guidelines relating to those appliances and applications. A complete list of approved appliances and applications with guidelines is available on Special Applications and Products.